|
|
ELECTRIC FANS
CLICK
HERE TO CONTACT US via E-Mail
|
|
||||||
| FAN
MOUNTING BRACKETS THIS FOUR PIECE FAN MOUNTING KIT WAS DESIGNED TO WORK WITH THE SPAL FANS, BUT CAN BE USED WITH OTHER ELECTRIC FANS. THE PLASTIC FEET ON THE ENDS OF THE STRAPS ARE DESIGNED TO SLIP INTO THE POCKETS ON THE FRAME OF THE FAN TO MOUNT SECURELY. WE RECOMMEND THE USE OF THESE RIGGED BRACKETS OVER "PUSH-THROUGH" MOUNTING KITS FOR ALL OF OUR FANS
|
AUTOMATIC
THERMOSTAT THIS THERMOSTAT IS PRESET TO TURN THE FAN ON AT 195 DEGREES AND BACK OFF WHEN THE TEMPERATURE DROPS BELOW THAT, AUTOMATICALLY. THE THERMOSTAT FEATURES 1/2" NPT TO FIT ANY SMALL BLOCK CHEVY HEAD, OR ANY OTHER HOLE TAPPED TO 1/2" NPT. MUST BE USED WITH A RELAY OF AT LEAST 30amps.
|
|
|
||||||
| FAN/THERMOSTAT / WIRING KIT THIS THERMOSTAT KIT DESIGNED BY SPAL FOR ELECTRIC FANS IS COMPLETE WITH
AUTOMATIC THERMOSTAT, THERMOSTAT PLUG, WIRING HARNESS, RELAY, FUSE & FUSE HOLDER, AND
ALL NECESSARY CONNECTORS. WIRING DIAGRAM INCLUDED.
|
ADJUSTABLE THERMOSTAT WITH
JUST A TURN OF THE KNOB YOU CAN SET YOUR FAN TO RUN CONSTANTLY, OR COME ON AT ANY
TEMPERATURE YOU DECIDE. THE PROBE ATTACHED TO THE END OF THE CAPILLARY TUBE REPLACES YOU
PETCOCK VALVE ON YOUR RADIATOR, THE THERMOSTAT MOUNTS TO THE INNER FENDER PANEL OR
SOMEWHERE CLOSE. SHOULD BE USED WITH A RELAY WHEN RUNNING HIGH PERFORMANCE FANS.
|
|
||||
| FAN
RELAY DESIGNED TO WORK WITH FAN THERMOSTATS TO CARRY THE LOAD OF THE ELECTRIC FAN, WE OFFER THIS 40amp RELAY.
|
|
|
