|
|
|
|
If you are planning to air
condition one of the many popular "mid-year" cars or pickups, the
Vintage Air Sure Fit Systems are just what you need.
1955-57 Chevrolet Sure Fit Series
|
|
|
|
While most early model street rods require a somewhat custom configured
package, these later cars usually maintain most of the factory sheet metal and
body features which allows unto engineer "standardized" complete
systems.
The increasing value of these cars and trucks, particularly Corvettes,
"pony cars", and muscle cars of the`60's, encourages us to design
kits which use factory drilled holes and brackets to maintain your car's value.
*In some cases very minor adjustments or an extra hole may be required. This is
because all auto manufacturers made changes to their vehicle assembly designs
during production runs. We will always try to minimize any alterations you may
have to make.
These kits offer the most complete and straight forward installations available
low anywhere. Our award winning instruction book lets and carefully designed
system package should make your Sure Fit installation job simple, fun and very
cool!.
|
|
|
|
Sure Fit kits are designed to place the evaporator case and hoses completely
behind the dash, In most cases the system will be
controlled by our adapters for your stock dash controls or with an optional new
reproduction control panel. Some early truck kits must use additional switches.
All Sure Fit systems provide floor heat and dehumidified defroster. Where
originally equipped, a/c air vents through your factory dash louvers.
The under hood components are designed to mount to stock engine bolt points and
the condenser, in most cases, mounts to stock radiator bolts. Again, because of
production design changes you may need to modify some mounting points slightly.
Other features such as pre-formed aluminum lines and condenser mounted drier
give these systems a super finished look. The best news is, because the entire
evaporator/heater box case is mounted inside behind the dash, this clears the
firewall area of your car or truck of those big ugly factory housings! Each
Sure Fit kit contains a firewall cover panel to seal off the opening left from
the removal of the OEM housing and provides refrigerant line and heater hose
routing.
Replace your worn out OEM air conditioning system with
a new Vintage Air "Sure Fit" kit.
Consider these benefits:
1. Sure Fits cost about the same as replacing only
an original compressor/evaporator on most cars.
2. Some 1969s and many 1970's cars cannot be calibrated to work properly with
134a refrigerant.
3. You get a full 3 year warranty and a system designed to out-perform your
original system. Use R-12 or environmentally friendly HFC 134a refrigerant.
4. Sure Fit systems retain the factory look inside your vehicle yet improve the
under hood appearance by eliminating all the heavy factory equipment.
5. Optional Proline Series components are compatible
with most Sure Fit systems.
6. You get the support of over 500 authorized dealers from coast to coast to
help you install and maintain your new Sure Fit system.
|
55-57 Chevy Dash |
|
|
Vintage Air Sure Fit Chevrolet air conditioning, heating and defrost systems are designed specifically for your classic Chevy. We match the coil and blower to give you the maximum amount of comfort in your vehicle. Factory controls are used. Sure Fit systems attach to existing holes in your dash and fire wall in most cases.
|
Complete Kit |
|
|
Complete kit includes: Evaporator, condenser, drier, compressor compressor bracket, hose kit and hi/low safety switch.
1955-57
Chevrolet Sure Fit System Features:
- Mounts completely behind dash.
- Center molded plenum and two remote ducts for maximum airflow.
- High capacity blower and coil for Nomads and wagons.
55-57 Chevy Electric fan package. For use with Super Flow condenser. Includes mounts.
|
370256-VCA |
|
|
|
The All-In-One Kit For Your Classic Chevy! |
EVAPORATOR KIT: Air conditioning, heating and defrost combination designed
specifically for your vehicle, Original deluxe control assembly in your dash
connects to and controls this unit. Designed to mount to existing holes in your
dash and firewall without drilling or fabrication. Evaporator kit comes
complete with all mounting brackets, hardware, louvers, duct hose, wiring
harness and installation instructions.
COMPLETE KIT: All above plus condenser and drier package. Attaches to existing
radiator mounting holes, No drilling* or fabrication required. Available for V8
or 6 cylinder radiator position, Comes with condenser,
mounting brackets, standard drier, pre-formed aluminum lines and mounting
hardware.
NOTE: Some installations may
require additional engine pulleys not included with kits. You must provide
V-belts and refrigerant.
NEW!- Our re-engineered Tri-five Chevy Sure Fit kits
now include Tite Fit compressor hard lines. Lines are
now rerouted through core support and drier mounts behind (See photo above) These kits may be upgraded to include our polished Tite Fit line kit and our popular polished Proline compressor/alternator bracket.
Vintage Air offers a new direct replacement radiator for your classic Chevy. We
also recommend using our heavy duty fan blade and shroud.
|
73055-VCR 1955-57 Chevrolet Radiator H D. Z-Line |
|
|
Stamped steel heater-delete panel included in '57 Chevy
Sure Fit kit. |
TO ORDER A SURE FIT SERIES KIT FOR YOUR 1955 -1957 CHEVY
USE THE NUMBERS BELOW
|
55055-VCZ-A |
1955 Chevrolet Evaporator Kit |
|
Complete kits start at $1150.00
Evaporator kits start at $625.00
Call for your application.
Need a catalog? Click here
CLICK HERE TO CONTACT US via
E-Mail
|
|
|
|